Skip to content
Free Shipping for USA customers over $50.00
Free Shipping for USA customers over $50.00
Everlast Storm 215C Multiprocess Mig / Stick Welder / Plasma Cutter Dual Voltage 120v / 240v

Everlast Storm 215C Multiprocess Mig / Stick Welder / Plasma Cutter Dual Voltage 120v / 240v

by Everlast
Save $350.00 Save $350.00
$1,729.00
$1,729.00 - $1,729.00
$1,729.00
$1,379.00
$1,379.00 - $1,379.00
$1,379.00
SKU 10

⚠️WARNING: Cancer and Reproductive Harm

www.p65warnings.ca.gov

Everlast proudly introduces the cutting-edge Storm 215c, a multi-process marvel that redefines innovation and versatility in the welding industry.

This powerhouse combines MIG, Stick, and Plasma Cutting processes, making it a go-to choice for serious fabrication and portable repairs. With an impressive duty cycle rating of 35% at maximum settings (200A MIG, 160A Stick, and 40A Plasma), the Storm 215c is a reliable tool that seamlessly fits into home garages, auto-body outlets, fabrication shops, and service trucks.

Loaded with features requested by professionals in each process, this unit offers uncompromising performance and adjustability. Its compact design not only saves valuable shop space but also facilitates easy portability for on-the-go operations.

Experience the advanced synergic function of the PowerSet mode, designed to simplify setup for users of all levels. Whether you're a novice welder or a pro on a tight schedule, PowerSet mode presets Volts, Amps, and other features, eliminating the need for time-consuming consultations with charts or calculators. Fine-tuning options for Volts and Amps are also available, allowing adjustments for welding position and personal style.

For those focused on portable repair operations, the Storm 215c requires just 8500 Surge watts of clean (5% or less THD) 240V power to operate from a generator. (Ensure the generator meets the required THD level by consulting the manufacturer before purchase.) Elevate your welding experience with the Storm 215c—where power, precision, and portability converge seamlessly.

Everlast proudly introduces the cutting-edge Storm 215c, a multi-process marvel that redefines innovation and versatility in the welding industry.

This powerhouse combines MIG, Stick, and Plasma Cutting processes, making it a go-to choice for serious fabrication and portable repairs. With an impressive duty cycle rating of 35% at maximum settings (200A MIG, 160A Stick, and 40A Plasma), the Storm 215c is a reliable tool that seamlessly fits into home garages, auto-body outlets, fabrication shops, and service trucks.

Loaded with features requested by professionals in each process, this unit offers uncompromising performance and adjustability. Its compact design not only saves valuable shop space but also facilitates easy portability for on-the-go operations.

Experience the advanced synergic function of the PowerSet mode, designed to simplify setup for users of all levels. Whether you're a novice welder or a pro on a tight schedule, PowerSet mode presets Volts, Amps, and other features, eliminating the need for time-consuming consultations with charts or calculators. Fine-tuning options for Volts and Amps are also available, allowing adjustments for welding position and personal style.

For those focused on portable repair operations, the Storm 215c requires just 8500 Surge watts of clean (5% or less THD) 240V power to operate from a generator. (Ensure the generator meets the required THD level by consulting the manufacturer before purchase.) Elevate your welding experience with the Storm 215c—where power, precision, and portability converge seamlessly.

Customer Reviews

Based on 6 reviews
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
L
LeAnn

Very nice straight forward welder

Arrived packaged well with no damage. Setup is easy and once you get the settings dialed in, you can make some very nice weld beads with this welder. I had trouble striking an arc at first. I have had other fluxcore welders but this is my first multi process welder. I did not have the polarity jumper plugged in. For mig weld with gas, you need that plugged into the positive dinse socket and your ground into the negative. For fluyx core, you need the jumper plugged into the negative socket and your ground into the positive.

D
David Evans

Great small job welder

The machine did amazing in 240v cycle duty limits but extended runs it struggled. Running the machine on 110v was a struggle but it was the best 120v welder I’ve used allowed me to take lots of breaks.

A
Alex r

What a difference

I don't consider my self a welder, I do know how, and have many times. I've been using an old miller mig at work for years. This one is night and day from the old blue machine. Bought this one for my personal shop, it is extremely easy to set up and use. I would definitely recommend this machine.

L
Larry Bruce

Powerful and easy to use

I bought this as my first welder to do some simple projects while learning how to weld. The MIG wire installation and weld setting adjustments are very simple. This plasma cutter was built to last, and exceeds my requirements.

C
Carl Ingraham

Metal Melter

Happy with the welder so far, using MIG process I was able to weld 1/8" and 3/16" thick material on 110V. Although I feel like with the same settings on 220V I was able to get better penetration but that is a subjective observation. Only minor complaint is the Power Set feature does not seem to be 100% on the mark, I still need to manually tweak things to dial it in. Have not used the Plasma cutter yet.

12