Skip to content
Now a distributor for The ESAB Group! Please be patient as we are adding new products daily!
Now a distributor for The ESAB Group! Please be patient as we are adding new products daily!

The all new ESAB EMP 210 Multi Process inverter based welder is finally here. The ESAB EMP 210 inverter-based welding system is ready to tackle any steel, stainless and aluminum projects thrown its way. The EMP 210 features professional-grade arc characteristics as well as full-featured digital controls which enable fine-tuning of the arc performance to deliver superior welds. The EMP 210 weighs just under 29 Ibs  and offers dual-voltage 120/230V flexibility. 

Features

 

  • ESAB EM 210 is a MIG/Flux Cored welding system with a 30-200A output; welds material from 22 gauge up to 3/8 in. in a single pass; accepts 4 and 8 in. diameter wire spools
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control; power to run stick electrodes up to 5/32 in.  Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation
  • Improve welding results with advanced functions typically found on industrial machines: MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control, Lift TIG arc starts, gas pre and post-flow, Stick hot start and arc force control
  • Portability and flexibility to weld in a variety of locations. Both units weigh just under 29 Ibs each, connect to 120/230V primary power, and are compatible with 10 kVa generators

 

Featuring ESAB Genuine Tweco & Victor Accessories:
ESAB EM 210 welding packaging includes a Tweco® Fusion® 180 MIG gun with Velocity® consumables, Victor® Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls.

ESAB EMP 210 welding packaging offers all of the above, plus a Tweco 17V TIG torch and Tweco electrode holder.

Both systems are spool gun-ready for MIG aluminum with optional spool gun and optional remote foot control for Lift TIG welding. (Spool gun and remote foot control sold separately.)

 

The all new ESAB EMP 210 Multi Process inverter based welder is finally here. The ESAB EMP 210 inverter-based welding system is ready to tackle any steel, stainless and aluminum projects thrown its way. The EMP 210 features professional-grade arc characteristics as well as full-featured digital controls which enable fine-tuning of the arc performance to deliver superior welds. The EMP 210 weighs just under 29 Ibs  and offers dual-voltage 120/230V flexibility. 

Features

 

  • ESAB EM 210 is a MIG/Flux Cored welding system with a 30-200A output; welds material from 22 gauge up to 3/8 in. in a single pass; accepts 4 and 8 in. diameter wire spools
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control; power to run stick electrodes up to 5/32 in.  Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation
  • Improve welding results with advanced functions typically found on industrial machines: MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control, Lift TIG arc starts, gas pre and post-flow, Stick hot start and arc force control
  • Portability and flexibility to weld in a variety of locations. Both units weigh just under 29 Ibs each, connect to 120/230V primary power, and are compatible with 10 kVa generators

 

Featuring ESAB Genuine Tweco & Victor Accessories:
ESAB EM 210 welding packaging includes a Tweco® Fusion® 180 MIG gun with Velocity® consumables, Victor® Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls.

ESAB EMP 210 welding packaging offers all of the above, plus a Tweco 17V TIG torch and Tweco electrode holder.

Both systems are spool gun-ready for MIG aluminum with optional spool gun and optional remote foot control for Lift TIG welding. (Spool gun and remote foot control sold separately.)