Ultimate Combo! SlashArc Mig Stick 140/135 and SlashArc Plasma CUT40

$709.99 $875.99

QTY:
Trust Badge

Ultimate Combo! SlashArc Mig Stick 140/135 and SlashArc Plasma CUT40

Introducing the SlashArc Multi Process Welder MIG/STICK 140/135 115 volt  inverter welding machine. This machine is like no other in its class. Its a 140 amp mig welder that with a push of a button can stick weld. The engineers at SlashArc cut no corners with this machine as it also comes with a metal drive roll system for strength and durability.  This machine is perfect for the home hobbyist and light fabricator who need to get the job done. 
 
  • Multi Process Mig and Stick Welding 
  • Metal Drive Roll system
  • Ships with Regulator and hose 
  • 30-140 amp mig welding range
  • 30-135 amp stick welding range 
  • Welds up to 3/16" with Solid Cored wire
  • Welds up to 1/4" with Flux Cored wire
  • Welds Mild and stainless steel as thin as 24 gauge
  • Uses Tweco style gun and consumables
  • Uses standard 115v household plug 
  • Comes ready to weld minus Gas and wire
  • 3 year warranty
Specifications
 
  • Power Vol. (V)                                             1 Phase 115V
  • Frequency (HZ)                                          50/60   
  • Rated Input Current (A).                          Mig:43.8 Stick 44.3
  • No-Load voltage (V)                                  59
  • Output Current (A)                                   Mig 30-140 Stick 30-135
  • Output Vol. (V)                                          Mig: 14-21 Stick 21.2-25.4
  • Duty Cycle (%)                                          30
  • Power Factor                                              0.73
  • Efficiency (%)                                            80
  • Wire Speed (in/min)                                  80-315
  • Post Flow (S)                                              1
  • Wire Diameter (mm)                                 Mig solid: .023-.030 Mig Flux cored : .030-.035
  • suitable thickness                                       1/4"
  • Housing shielding grade.                          IP21
  • Insulation grade                                         F
  • Cooling method                                         Fan-Cooled
  • Weight                                                        24lbs
  • Dimension                                                  18"x11"x8"         
Introducing the SlashArc SACUT 40 40 Amp Dual Voltage Input 115/230v plasma cutter with a Trafimet CB50 torch. With the SACUT 40 you are getting the best bang for your buck. Inverter technology gives this machine a smooth arc whether you are running on 115v or 230v. With the SACUT 40 you can cut material as thin as 24 gauge and as thick as 3/8". Inside of the SACUT40 you can find an internal moisture separator to help ensure clean/dry air runs through the torch to give you a smooth consistent arc. The SACUT40 consumables are readily available as they are a popular amongst machines today. Backed by SlashArcs 3 year warranty!
 
This machine uses the same consumables that are found on Eastwoods Versa-cut 40 
 
  • Rated 40 amp output
  • cuts up to 3/8"
  • 20' torch 10' ground clamp
  • works with 115v and 230v 
  • 3 year warranty