Skip to content
Free Shipping for USA customers over $50.00
Free Shipping for USA customers over $50.00

ESAB EM 210 MIG ONLY WELDER (0700501200)

by Esab
Save $349.00 Save $349.00
Original price $1,815.00
Original price $1,815.00 - Original price $1,815.00
Original price $1,815.00
Current price $1,466.00
$1,466.00 - $1,466.00
Current price $1,466.00
SKU 0700501200

⚠️WARNING: Cancer and Reproductive Harm

www.p65warnings.ca.gov

The all new ESAB EM 210 Mig only inverter based welder is finally here. The ESAB EM 210 inverter-based welding system is ready to tackle any steel, stainless and aluminum projects thrown its way. The EM 210 features professional-grade arc characteristics as well as full-featured digital controls which enable fine-tuning of the arc performance to deliver superior welds. The EM 210 weighs just under 29 Ibs  and offers dual-voltage 120/230V flexibility. 

Features

 

  • ESAB EM 210 is a MIG/Flux Cored welding system with a 30-200A output; welds material from 22 gauge up to 3/8 in. in a single pass; accepts 4 and 8 in. diameter wire spools
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control; power to run stick electrodes up to 5/32 in.  Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation
  • Improve welding results with advanced functions typically found on industrial machines: MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control, Lift TIG arc starts, gas pre and post-flow, Stick hot start and arc force control
  • Portability and flexibility to weld in a variety of locations. Both units weigh just under 29 Ibs each, connect to 120/230V primary power, and are compatible with 10 kVa generators

 

Featuring ESAB Genuine Tweco & Victor Accessories:
ESAB EM 210 welding packaging includes a Tweco® Fusion® 180 MIG gun with Velocity® consumables, Victor® Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls.

ESAB EMP 210 welding packaging offers all of the above, plus a Tweco 17V TIG torch and Tweco electrode holder.

Both systems are spool gun-ready for MIG aluminum with optional spool gun and optional remote foot control for Lift TIG welding. (Spool gun and remote foot control sold separately.)

 

The all new ESAB EM 210 Mig only inverter based welder is finally here. The ESAB EM 210 inverter-based welding system is ready to tackle any steel, stainless and aluminum projects thrown its way. The EM 210 features professional-grade arc characteristics as well as full-featured digital controls which enable fine-tuning of the arc performance to deliver superior welds. The EM 210 weighs just under 29 Ibs  and offers dual-voltage 120/230V flexibility. 

Features

 

  • ESAB EM 210 is a MIG/Flux Cored welding system with a 30-200A output; welds material from 22 gauge up to 3/8 in. in a single pass; accepts 4 and 8 in. diameter wire spools
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control; power to run stick electrodes up to 5/32 in.  Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation
  • Improve welding results with advanced functions typically found on industrial machines: MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control, Lift TIG arc starts, gas pre and post-flow, Stick hot start and arc force control
  • Portability and flexibility to weld in a variety of locations. Both units weigh just under 29 Ibs each, connect to 120/230V primary power, and are compatible with 10 kVa generators

 

Featuring ESAB Genuine Tweco & Victor Accessories:
ESAB EM 210 welding packaging includes a Tweco® Fusion® 180 MIG gun with Velocity® consumables, Victor® Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls.

ESAB EMP 210 welding packaging offers all of the above, plus a Tweco 17V TIG torch and Tweco electrode holder.

Both systems are spool gun-ready for MIG aluminum with optional spool gun and optional remote foot control for Lift TIG welding. (Spool gun and remote foot control sold separately.)

 

Customer Reviews

Based on 5 reviews
80%
(4)
0%
(0)
0%
(0)
0%
(0)
20%
(1)
D
David Bell
Esab 210 mig missing

I ordered the welder 14 days ago. It still has not arrived. I can't find anything good to say about how slow this company has been at sending the product.. It wasn't shipped until after it was supposed to arrive, poor customer service.

M
Michael Martin
ESAB MiG

Shipping was quick and welder was received as ordered.

R
Richard Tripp
Impressive

Only used on 110v so far but does a beautiful weld.Better than the 135 Millermatic I have or just replaced.Waiting on 50amp cord to come in so I can try it on 220v.I am expecting to be we’ll satisfied with this welder.

D
Dennis Crabtree

So far it's worked great. I haven't TIG welded with it yet but the arc and MIG both work great. It s a good multi-process welder. Very nice welder I have welded two different dual exhaust systems on with it. I don't have to say much after that.

D
Dominador Tamoria

Lots of power. I welded some 3/8 thick hot rolled steel today. Awesome. I doubt I use my big MIG welder anymore since I bought this. Getting a tank of helium for the lift Tig. Not as easy as a high-frequency start Tig but they work well with practice. I have a similar stick welder. They work great.