Skip to content
Free Shipping for USA customers over $50.00
Free Shipping for USA customers over $50.00

Oxylance Sure Cut Lance System Kit With G250-150-540 Regulator, Jrsc2024s-reg

The Oxylance Sure Cut system will cut virtually any metal, both ferrous and non-ferrous, and is faster than conventional oxy-acetylene cutting or carbon arc gouging.  The Sure Cut exothermic cutting rods don't require preheating or cleaning of the material before cutting.

𝐋𝐎𝐍𝐆 𝐋𝐀𝐒𝐓𝐈𝐍𝐆: The best and premium quality combined ingredients are used to produce this product for long-lasting use. We ensure you that this product can use day to day without any worries.

𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄: Oxylance Sure Cut Lance System Kit is very easy to use and cost-effective for most applications. Designed for gas welding in medium-duty and operations of cutting.

𝐌𝐎𝐑𝐄 𝐅𝐀𝐒𝐓𝐄𝐑: This Oxylance Sure Cut Lance System Kit is faster than any Lance System Kit. It is also suitable for both ferrous and non-ferrous metals.

𝐃𝐎𝐍'𝐓 𝐑𝐄𝐐𝐔𝐈𝐑𝐄 𝐂𝐋𝐄𝐀𝐍𝐈𝐍𝐆: The premium quality ensures that there is no need to preheat or cleaning of the material before cutting.

𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: This product includes Holder - 25’ X 5/16” Oxygen Hose - 25’ X #4 Power Lead - 25’ X #4 Ground Lead w / Striker Plate - 1/4” and 3/8” Collet - 12 ea. 1/4” X 24” Sure Cut Rods - 12 ea. 3/8” X 24” Sure Cut Rods - 26” Tool Box.

𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒:

  • SureCut Lance System Kit
  • Don't require preheating
  • Ferrous and non-ferrous
  • Faster than others
  • Long-lasting use
  • Easy to use

Oxylance Sure Cut Lance System Kit With G250-150-540 Regulator, Jrsc2024s-reg

The Oxylance Sure Cut system will cut virtually any metal, both ferrous and non-ferrous, and is faster than conventional oxy-acetylene cutting or carbon arc gouging.  The Sure Cut exothermic cutting rods don't require preheating or cleaning of the material before cutting.

𝐋𝐎𝐍𝐆 𝐋𝐀𝐒𝐓𝐈𝐍𝐆: The best and premium quality combined ingredients are used to produce this product for long-lasting use. We ensure you that this product can use day to day without any worries.

𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄: Oxylance Sure Cut Lance System Kit is very easy to use and cost-effective for most applications. Designed for gas welding in medium-duty and operations of cutting.

𝐌𝐎𝐑𝐄 𝐅𝐀𝐒𝐓𝐄𝐑: This Oxylance Sure Cut Lance System Kit is faster than any Lance System Kit. It is also suitable for both ferrous and non-ferrous metals.

𝐃𝐎𝐍'𝐓 𝐑𝐄𝐐𝐔𝐈𝐑𝐄 𝐂𝐋𝐄𝐀𝐍𝐈𝐍𝐆: The premium quality ensures that there is no need to preheat or cleaning of the material before cutting.

𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: This product includes Holder - 25’ X 5/16” Oxygen Hose - 25’ X #4 Power Lead - 25’ X #4 Ground Lead w / Striker Plate - 1/4” and 3/8” Collet - 12 ea. 1/4” X 24” Sure Cut Rods - 12 ea. 3/8” X 24” Sure Cut Rods - 26” Tool Box.

𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒:

  • SureCut Lance System Kit
  • Don't require preheating
  • Ferrous and non-ferrous
  • Faster than others
  • Long-lasting use
  • Easy to use

Customer Reviews

Based on 8 reviews
75%
(6)
25%
(2)
0%
(0)
0%
(0)
0%
(0)
D
Darren Joyce
God of pin removal.

Our company purchased the kit about 6 months ago after a recommendation from a boom inspector/ welser recommended one for 4 pins, 80mm diameter by 200 mm in length. I and another employee had tried a 50 ton hollow jack, heat, air hammer, sledge and the last a prayer with non denominational curse words that would make Satan rethink his man hood. It arrived, tested it on a scrap 60mmx 100mm pin and it went through it like arrow through jello. Next, a scrap ford 6.0. Six seconds and into the crank through the block. The pins that were seized, taking my time, about 2 minutes making sure to not damage the boom and cylinder I was in. Quick tip. Keep plenty of oxygen and don't try to squeeze every pound out a bottle, which I would recommend at least 2 for a small job. Less volume and pressure, longer it will take and rods go pretty quick. Metals, ferrous, non ferrous, concrete, cats or an annoying coworker. It'll go through them faster than Hellen Keller at a braille competition or waaaater.

K
Kaara Reitzel

I bought this to remove a frozen pin on a log loader boom. It worked absolutely perfect!! I've never used one of these before but I really didn't have any problem getting it to work.

J
John Carter

Works fine for me. Seems to work well only used it a few times so far so good. Quality product. I'm very happy with this purchase.

P
Paula Chandler

The media could not be loaded. Â This is an excellent tool to burn or melt pins on heavy equipment. I sliced through 6 inch pins like butter just make sure you use sufficient ppe because its like standing in front of a dragons mouth.

N
Nicole M. Thompson

The torch is very well built and it the regulator is easy to handle. Dont hesitate youll be glad you got it!

12