Skip to content
Free Shipping for USA customers over $50.00
Free Shipping for USA customers over $50.00

𝐓𝐰𝐨 𝟏𝟏 𝐥𝐛 𝐑𝐨𝐥𝐥𝐬 𝐄𝐑𝟕𝟎𝐒-𝟔 𝐌𝐢𝐥𝐝 𝐒𝐭𝐞𝐞𝐥 𝐌𝐈𝐆 𝐖𝐞𝐥𝐝𝐢𝐧𝐠 𝐖𝐢𝐫𝐞

A Brand new Inweld 2 lb roll of steel welding wire. This wire is used with 75% argon/25% CO2, or 100% CO2 shielding gas. This is a 4" diameter spool that has the standard 5/8" spindle hole. Note, this is precision layer wound wire, not a random wound!!  Precision layer wound is like a spool of thread, each revolution is next to the other, which feeds better and provides a more consistent wire feed rate.

𝐒𝐈𝐙𝐄 𝐀𝐍𝐃 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍: This is an exceptional value and works in any MIG welder that accepts a 2 lb 4" diameter spool. This product is a great choice for use of all kinds of spool guns.

𝐋𝐀𝐘𝐄𝐑 𝐖𝐎𝐔𝐍𝐃: This wire is a precision layer wound not another random wound, like a spool of thread. Which feeds better and supplies an extra compatible wire rate of feed.

𝐖𝐈𝐃𝐄 𝐔𝐒𝐀𝐆𝐄𝐒: 0.023" diameter wire is the best diameter for doing thin sheet metal, and depending on your welder will allow you to go up to 3/16" to 1/4" material, depending on your application and the amperage of your welder.

𝐄𝐀𝐒𝐘 𝐓𝐎 𝐖𝐄𝐋𝐃: This wire makes the welding take easier and more efficient with the highest safety of welders.

𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬:

  • Precision layer wound
  • 11 lb rolls of .023"
  • 4" diameter spool
  • 5/8" spindle hole
  • Shielding gas

𝐓𝐰𝐨 𝟏𝟏 𝐥𝐛 𝐑𝐨𝐥𝐥𝐬 𝐄𝐑𝟕𝟎𝐒-𝟔 𝐌𝐢𝐥𝐝 𝐒𝐭𝐞𝐞𝐥 𝐌𝐈𝐆 𝐖𝐞𝐥𝐝𝐢𝐧𝐠 𝐖𝐢𝐫𝐞

A Brand new Inweld 2 lb roll of steel welding wire. This wire is used with 75% argon/25% CO2, or 100% CO2 shielding gas. This is a 4" diameter spool that has the standard 5/8" spindle hole. Note, this is precision layer wound wire, not a random wound!!  Precision layer wound is like a spool of thread, each revolution is next to the other, which feeds better and provides a more consistent wire feed rate.

𝐒𝐈𝐙𝐄 𝐀𝐍𝐃 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍: This is an exceptional value and works in any MIG welder that accepts a 2 lb 4" diameter spool. This product is a great choice for use of all kinds of spool guns.

𝐋𝐀𝐘𝐄𝐑 𝐖𝐎𝐔𝐍𝐃: This wire is a precision layer wound not another random wound, like a spool of thread. Which feeds better and supplies an extra compatible wire rate of feed.

𝐖𝐈𝐃𝐄 𝐔𝐒𝐀𝐆𝐄𝐒: 0.023" diameter wire is the best diameter for doing thin sheet metal, and depending on your welder will allow you to go up to 3/16" to 1/4" material, depending on your application and the amperage of your welder.

𝐄𝐀𝐒𝐘 𝐓𝐎 𝐖𝐄𝐋𝐃: This wire makes the welding take easier and more efficient with the highest safety of welders.

𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬:

  • Precision layer wound
  • 11 lb rolls of .023"
  • 4" diameter spool
  • 5/8" spindle hole
  • Shielding gas